EN 14399-3 HEX NUTS / EN 14399-4 HEX NUTS



EN 14399-3 HEX NUTS / EN 14399-4 HEX NUTS

Name: EN 14399-3 HEX NUTS / EN 14399-4 HEX NUTS
Brand: Ningbo Datian Fastener Co., Ltd.

DT Fastener provides quality EN hex nut fasteners at great prices. Our EN fasteners series include EN 14399-3 and EN 14399-4 series.

EN is European Norm. According to the common obligations undertaken by the participating countries, the adoption of this EN standard will give legal status to the relevant national standards of a member state, or revoke the relevant standards of a certain country that is opposed to it. That is to say, the national standards of member states must be consistent with the EN standards. CENELEC and CEN and their joint body CEN/CENELEC are the leading standards-setting bodies in Europe. CENELEC was established in Brussels, Belgium in 1976, as a result of the merger of two earlier institutions. Its purpose is to harmonize the electrical standards promulgated by the relevant European countries' standards bodies and to eliminate technical barriers to trade.

Buy EN 14399 3 Hex Nuts

Datian EN 14399-3 HEX NUTS / EN 14399-4 HEX NUTS Specifications

EN 14399-3 Hex Nut EN 14399-4 Hex Nut



EN 14399-3 Hex Nut

BS EN 14399-3-2005 High-strength hex nuts for steel structures - HR type drawing

EN 14399-3 HEX NUTS Dimensions

Legend:	Making:
P=pitch	Carbon Steel:6,8,10,12
K=height of the nut	Thread:6H
D=the nominal diameter of the thread	Surface:BLK,ZP,HDG,etc
E=The length of the diagonal
S=The length of the flat



EN 14399-4 Hex Nut

EN 14399-4-2005 High-strength hex nuts for steel structures - HV type has equivalent norms included: GB/T 18230.4, ISO 7414, DIN EN 14399-4, UNI 5713.

EN 14399-4 HEX NUTS Dimensions

Legend:	Making:
P=pitch	Carbon Steel:6,8,10,12
K=height of the nut	Thread:6H
D=the nominal diameter of the thread	Surface:BLK,ZP,HDG,etc
E=The length of the diagonal
S=The length of the flat

Difference between EN 14399-3 and EN 14399-4

Both EN 14399-3 nuts and EN 14399-4 nuts are high-strength nuts and bolts for preloading. BS EN 14399-3 structural nuts are used for part 3 which belongs to system HR. EN ISO 14399-4 structural nuts are used for part 4 which belongs to system HV.

 Products